Please Choose Your Language
| Quantity: | |
|---|---|
The Printing-Industry-Specific High-Temp Air Source Heat Pump is a professional steam generator designed for printing facilities. It delivers high-temperature saturated steam for drying printed materials, curing inks and coatings, preheating paper rolls, and cleaning equipment. Unlike electric resistance heaters or gas boilers, this unit uses advanced heat pump technology to transfer heat from ambient air into useful steam. It operates with no combustion, zero emissions, and no open flames, making it much safer for use in printing plants where paper, inks, and solvents are present. It provides substantial energy savings, reducing both operating costs and carbon footprint.
Printing plants handle flammable materials: paper, solvents, and ink. Traditional boilers with open flames pose a fire risk. Our heat pump has no flame, no hot flue gas, and no fuel storage—removing major fire hazards. It also produces clean steam without combustion residues, so no soot or oil mist contaminates your print shop. The steam can be used for indirect heating without introducing odors or particles that could affect print quality.
Drying and curing are among the most energy-intensive steps in printing. This heat pump captures free heat from the air and upgrades it to high-temperature steam. For every unit of electricity it uses, it delivers multiple units of useful heat—far more efficient than electric resistance heaters. Compared to gas-fired dryers, the savings are often even greater. Many printing plants recover their equipment investment within a short period simply from reduced energy bills. The unit also runs at lower operating temperatures than some dryers, which can be gentler on heat-sensitive substrates.
Printing shops are busy and noisy. The heat pump operates quietly, adding little background noise. Its compact design allows installation against a wall, on a mezzanine, or even outdoors. The control system is straightforward: set the desired temperature and the unit runs automatically.
These processes use solvent-based or water-based inks that require significant heat to dry quickly. The heat pump provides consistent steam to drying tunnels or cylinders, ensuring even evaporation without hot spots that could warp the substrate. The steam system can be zoned to apply more heat where needed.
Offset presses often need steam for ink curing, blanket cleaning, and preheating paper rolls in cold months. The medium-capacity unit supplies enough steam for a medium-sized pressroom. It can also provide hot water via a heat exchanger for plate processing.
Large printing plants running high-speed web presses produce tons of printed material daily. Multiple high-capacity units can be installed alongside the production line to provide steam for rapid drying of coated papers and packaging boards. The modular design allows adding capacity as production grows, without replacing the entire system.
The printing-industry-specific heat pump should be installed in a well-ventilated area, either indoors near the pressroom or outdoors with weather protection. It requires a flat concrete pad or sturdy platform. Steam piping should be insulated to prevent heat loss and condensation. The unit requires water supply and standard three-phase electrical power. No chimney, fuel tank, or exhaust duct is needed. The control panel can be placed at a convenient location for easy monitoring. Installation is typically completed within a few days without interrupting production.
Yes. The unit is specifically designed to produce high-temperature saturated steam for industrial drying and curing applications. It can supply steam at the temperatures typically used in printing processes, including ink drying and coating curing. For specific temperature requirements, our sales team can guide you to the right model.
Yes, very safe. Because there is no open flame, no hot combustion gases, and no fuel stored on-site, the heat pump greatly reduces fire and explosion risks compared to gas or oil heaters. The electrical components are fully enclosed and protected against dust. Many printing plants choose our heat pump specifically to improve safety in their facilities.
The smallest model takes up less floor space than a standard pallet. Larger models are bigger but still far more compact than a boiler with its fuel tank and chimney. You can place the unit outdoors or against an exterior wall. We recommend leaving some clearance around the unit for air intake and maintenance access. Our engineers can work with you to plan the best location for your layout.
