Please Choose Your Language
loading
Leomon
| Availability: | |
|---|---|
| Quantity: | |
Our 150°C high-temperature steam heat pump is an advanced industrial-grade steam generation solution designed to produce saturated steam at temperatures between 110°C and 150°C by recovering low-grade heat from air, water, or industrial waste heat sources. This innovative system represents a breakthrough in industrial heating technology, offering a sustainable and cost-effective alternative to traditional coal-, oil-, or gas-fired boilers.
Equipped with high-efficiency compressors (including Danfoss high-temperature models) and cutting-edge refrigeration technology, the unit upgrades low-grade thermal energy into high-grade steam while consuming only a minimal amount of electricity. It achieves an energy efficiency of up to 380%, resulting in a 70% reduction in primary energy consumption compared to conventional heating methods.
With an output range covering steam temperatures from 110°C to 150°C—available in models from SRS30XHRS to SRS255XHRS—our high-temperature steam heat pump is suitable for a wide array of industrial processes, including heating for chemical reactions, distillation, concentration, sterilization, and drying.
Applications:
* Agriculture: Maintaining constant temperatures in greenhouses for mushroom cultivation; steaming and drying of agricultural produce, food products, and medicinal herbs.
* Biopharmaceuticals: High-temperature cleaning, sterilization, and drying.
* Rubber Industry: Vulcanization and drying processes for rubber products.
Features:
1. Maximum capacity per unit: 220 kW
2. Modular design for flexible configuration
3. Built-in primary circulation pump (optional)
4. Compact, space-saving design
5. Indoor installation allows for the utilization of free auxiliary cooling.
6. 7-inch touchscreen controller for easy operation
7. RS485 communication and Modbus gateway support
Advantages:
1. High-temperature steam output: Directly generates saturated steam at 110°C–150°C, meeting the steam requirements for various industrial production processes and commercial applications.
2. Exceptional Energy Efficiency: Under optimal conditions (with a water-side recovery temperature of 85°C), the energy efficiency ratio (EER) can reach 5.5. Compared to electric heating, this reduces energy costs by over 60%, leading to significant savings in operational expenses.
3. Dual Heat Source Compatibility: Heat can be recovered from either air sources (ambient air or process exhaust air) or water sources (groundwater, waste hot water, or industrial process water), offering flexible installation options.
4. Multi-Compressor System: Equipped with Danfoss high-temperature semi-hermetic reciprocating compressors, featuring a dual-loop design, optimized gas flow paths, and reduced pressure drop, which substantially enhances compressor efficiency.
5. Environmentally Friendly Operation: The system involves no combustion, resulting in zero emissions of dust, smoke, or pollutants, thereby contributing to improved air quality. It utilizes eco-friendly refrigerants that comply with international standards.
6. Intelligent Control: Features an advanced PLC control system with remote monitoring and predictive maintenance capabilities. Supports management via mobile app and WeChat official account, allowing for real-time tracking of equipment status.
7. Flexible Output Regulation: Parameters such as steam temperature, pressure, and flow rate can be precisely adjusted to meet specific process requirements and operating conditions, adapting to complex and dynamic production needs.
8. Comprehensive Protection: Includes multiple safety mechanisms—such as compressor overload protection, discharge temperature monitoring, overheat prevention, water flow monitoring, and sensor fault detection—to ensure safe and reliable operation.
9. Long Service Life: Built with high-quality components and corrosion-resistant materials, the robust design ensures an extended service life of 10–15 years—significantly longer than that of traditional heating equipment.
Stacked air source high-temperature steam heat pump(150℃ steam) | ||||||
Model | FKH-18II/TGW | FKH-45II/TGW | FKH-65II/TGW | FKH-90II/TGW | FKH-130II/TGW | FKH-250I/TGW |
Generate steam quantity | 30kg | 80kg | 100kg | 160kg | 200kg | 360kg |
Power Specifications | 380V 3N~50Hz | 380V 3N~50Hz | 380V 3N~50Hz | 380V 3N~50Hz | 380V 3N~50Hz | 380V 3N~50Hz |
A1 heating capacity(20℃ | 20KW | 45KW | 65KW | 90KW | 130KW | 250KW |
A1 Heating consumption | 12KW | 28KW | 40.5KW | 56KW | 81KW | 165KW |
Maximum operating current | 30A | 70A | 120A | 150A | 200A | 400A |
Noise | ≤72dB(A) | ≤72dB(A) | ≤75dB(A) | ≤80dB(A) | ≤80dB(A) | ≤86dB(A) |
Unit size(length x width x | 1600×780×2000 | 2100×780×2000 | 3260×1030×2400 | 3260×1230×2400 | 3260×1230×2400 | 4000×2260×2600 |
Steam connection size | DN32 | DN32 | DN40 | DN40 | DN40 | DN50 |
Size of water replenishment | DN20 | DN20 | DN20 | DN20 | DN20 | DN20 |
Unit weight (kg) | 240 | 580 | 1180 | 1430 | 2100 | 5000 |
Price(usd) | 6176 | 12500 | 16470 | 22058 | 30882 | 63235 |
The above perfomance parameters are formulated according to the requirements: | ||||||
Operating conditions:ambient temperature of 20℃,steam temperature of 150℃; | ||||||
Have questions about our energy-efficient high-temperature heat pumps? We’re here to help! Whether you need product details, installation support, or assistance with an order, our team is ready to assist you.
