Leomon
| Availability: | |
|---|---|
| Quantity: | |
The Leomon high-temperature heat pump adopts an intelligent temperature control system and can provide high-temperature hot water and steam up to 130°C.
Leomon high temperature heat pumps provide excellent part load efficiency, reducing maintenance costs over the life of the heat pump. In addition, the noise level is particularly low under partial load conditions. In addition to efficient and silent operation, heat pumps equipped with smart technology can operate in a temperature range of -25°C to +50°C.
Features
1. Full inverter enables high seasonal performance
2. Natural refrigerants R134A, R1234ze global warming potential (GWP) = 0.02
3. Low environmental impact
4. Maximum temperature up to 130°C LWT
5. Support decarbonization plans and fossil fuel boiler bans
6. Compact structure and easy installation.
7. Modular design, can accommodate up to 4 units (500kW)
Advantages
1. Perform well
*EC variable speed blower and optional variable speed pump
* Energy efficiency is 15% higher than the previous generation product with a similar footprint.
2. Quick and easy installation
* Compact design
* Integrated hydraulic module (optional)
3. Very low operating costs
* High seasonal energy efficiency
* Scroll compressor equipped with high-efficiency variable frequency motor
4. Standard low noise level
* Condenser equipped with variable speed fan for quieter operation
* Specific control functions or features designed to reduce noise levels at night or during unoccupied periods
5. Designed to support boiler replacement
* These units are designed with compact size in mind, so they can be installed in locations where a heat pump was not originally planned to replace an old boiler, taking up minimal space.
* The highest temperature of hot water can reach 130°C, the lowest temperature can reach 70°C, and the lowest outdoor temperature can reach -10°C.
6. Remote management (standard)
* Easily accessible via the Internet
* Various remote control, monitoring and diagnostic functions
Type | FKH-20II/TGW | FKH-50II/TGW | FKH-100II/TGW | |
Top out wind | Top out wind | Top out wind | ||
Power specifications | 380V 3N~50Hz | 380V 3N~50Hz | 380V 3N~50Hz | |
Heating capacity under A1 operating | 20kW | 50kW | 100kW | |
Heating consumption power under A1 working | 12kW | 29kW | 58kW | |
Heating capacity under A2 working | 19kW | 49kW | 98kW | |
Heating consumption power under A2 | 12kW | 31kW | 62kW | |
Heating capacity under A3working condition( | 15kW | 42kW | 85kW | |
Heating consumption power under A3 | 11.5kW | 32kW | 63kW | |
Heating capacity under A4working condition(-20) | 14kW | 37kW | 75kW | |
Heating consumption power under A4 | 11.2kW | 30kW | 60kW | |
Maximum operating current | 36A | 70A | 140A | |
discharge | 3.4m³/h | 8.6m³/h≤ | 17.2m³/h | |
noise | ≤58dB(A) | 60dB(A) | ≤72dB(A) | |
Water side pressure loss | ≤75kPa | ≤75kPa | ≤88kPa | |
Unit size(length xwidth x height mm) | 860×780×1780 | 1550×780×1780 | 2260×1230×2170 | |
CONNECT SIZE | DN32(hexagon nipples) | DN40(hexagon nipples) | DN80(flange) | |
Unit weight(kg) | 240 | 450 | 1350 | |
If you need a high temperature heat pump solution, please contact us. Our heat pump experts will give you the best solution.